Maximum, minimum pressureï¼›Air oil ratio control screw.
After stopping the production, turn the blowing knob to the blowing position, and turn it back to the production position before preheating the next production.
Two. The fuel injection valve will be blocked by foreign matters, resulting in loose closing and oil leakage during preheating .
Correct relationship between frequency and oil pressure of frequency converter, If there is alarm signal on the touch screen, check the alarm reason .
Feed port, feed end seal ring, Rap ring, discharge end seal ring.
When working, the outlet temperature should not be lower than 80°C.
1ã€an electronic over temperature switch at the inlet of the filter.2ã€Computer parameters.
