Star, triangle.

40% at least  ,  80% at most .

500V500MΩ.

Enter into the next when press key. Press  key to display [on], and then go into parameters setting menu. On entering the state of parameter setting, [F1] firstly display on displayer.Start measuring range setting when press  keyFor example: 3T scale will be set as 3000(Kg as unit). S

The way of maintenance of pneumatic parts1. Periodically clean the air filter and oil cup    Clean the filter with solvent gasoline carefully, and blow with compressed air.    Cups should be cleaned with soapy water.2. The pneumatic devices lubricating is recommended to use speci

Excitation speed regulation、Frequency  control.

20mv.

Less than or equal to 4 ohm.

Powerup ZeroIf Poweruo Zero is enabled, the terminal tries to capture zero upon power uo. If Powerup Zero capture is enabled and the weight on the scale is outside of the zero capture range , the display will indicate “EEE” or “-EEEâ€&

Maximum, minimum pressureï¼›Air oil ratio control screw.